With WeTek Pro Remote, you can use th IR learning feature to use it with other devices.
Press the (STB/TV button) to change to TV mode. (Green LED)
Now, press and hold the (Learn button) until the Green LED becomes static.
Once the Green LED is static, press the button you desire to learn (For this example lets use the Vol- Key).
Press the (Vol-)Key on the Pro Remote until the Green LED starts to blink.
Now point the TV remote directly to the IR of the Pro Remote and press the key you desire to teach on the TV remote. (See image below)
Once Pro Remote learned the key, the Green LED will stop Blinking.
Now, you can either continue to mapping the buttons or finish the learning process.
To continue mapping, press another key (in this example lets use the Vol + key)
After you press the Vol+ on the Pro Remote, the Light will start to blink.
Now press the Vol + on the TV remote and the LED of the Pro Remote will stop Blink, meaning the learning process is done. You can continue doing this until the entire remote is configured according to your preference.
To finish the learning process and start using the remote just press the (STB/TV button)
If you have any doubts please, do not hesitate to contact us.